Replaces
Recommended for your 2005 Hyundai Elantra
Frequently bought together
Attention California Customers:
WARNING: This product can expose you to chemicals including Carbon black(airborne, unbound particles of respirable size), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the rear engine mount on this 2005 Hyundai Elantra with a 2.0 liter, pretty much the same as any 2001-2006 Elantra. You'll need a jack and jack stands.
You'll need to raise up and support the car, and then also support the engine lightly. And then you'll need a 14 millimeter socket and ratchet as well as a 14 millimeter wrench. It's actually a pretty easy operation once you have the car up on jack stands.
Your rear lower motor mount is on the back side of the transmission. You want to support the transmission just slightly, right next to the mount itself. And then locate your one, two, three, four mounting bolts. And those are 14 millimeters.
It's not that big of a mystery, just need to know where it is and how you get to it. Use jack and jack stands, 14 millimeter socket and ratchet, and a 14 millimeter wrench. Remove the bolts, and the mount comes down, and then you can put a new mount up in its place. As you can see our original mount is in fine shape, so we're just taking this apart and putting it back together to show you.
Now I'm putting the motor mount back up in. I put my four bolts back in loosely before I go and tighten it in. With that done, I'll tighten back up. With everything tight I can remove my jack, pull it out of the way.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
We are a caring, passionate team of auto enthusiasts who are here to help, If you have a question about our parts or a repair, please call 1-888-844-3393 between 8 AM & 9:30 PM M-F and 8 AM & 4 PM Sat. and Sun. (EST).
In stock orders ship same-day when ordered by 4 PM ET. Need your parts faster? We also offer expedited shipping at checkout.
