Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Description
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Included in This Kit
Quantity
Part
Brand
Replaces OE Number
1
2007-11 Toyota Camry Passenger Side Power Paint to Match Mirror TRQ MRA05732 MRA09204
TRQ
1
2007-11 Toyota Camry Driver Side Power Paint to Match Mirror without Heat TRQ MRA05733 MRA09204
TRQ
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Side Mirrors 2006-11 Toyota Camry
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Removing the Mirror
Pry off the mirror trim piece by hand
Remove the three 10mm nuts from the mirror base
Disconnect the mirror electrical connector
Pull the mirror off the door
2. Installing the Mirror
Pull the protective caps off the new mirror's studs
Remove the backing from the mirror foam
Apply the mirror foam to the mirror base
Connect the mirror electrical connector
Line up the mirror studs with the door
Fasten the three 10mm nuts onto the mirror studs
Clip the mirror base trim onto the mirror base
The interior comes up pretty easily. Just pops it right off these two clips. I'll take the 10mm deep socket. Remove the last nut. The mirror's actually resting on this plastic tab so it doesn't fall out.
I've got the window down, that does help. What I'm going to do is press down on this plastic tab, slide the mirror out of the door, and just reach my thumb through where the lock is, push it down, unlock it, pull the mirror right out.
Here's our original mirror from our vehicle, and a brand new one from 1AAuto.com. So, it is black plastic. You could install it as is, or you could bring it to a body shop and have it color matched to your vehicle. But, if you just need a mirror, and you want to save some money, you can install it as is. It ships with some protective packaging, so the corner doesn't get broken.
They both have the same three mounting studs, this little lock tab. These have protective caps on them. Just pull those off before you install it. It also comes with new foam, just like this one. That'll install just like that. It has a stick-on backing. You can peel off this white backing, and then install it in place. It'll stay there for you. This should fit and look great on your vehicle.
Take our new mirror. I'm going to hold the electrical connector there, plug it in at the same time as I'm lining it up with holes. So, it just snapped in. Push it in, just get that lock over there, so it holds it in place. Install the original nuts, and tighten the nuts. Tighten them now evenly. Once I feel they get tight, I'm just going to stop. I don't want to break the studs off from the mirror. I'll reinstall the trim piece. These clips are going to match up with these holes here. It just snaps into place. The mirror's installed.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.
We are a caring, passionate team of auto enthusiasts who are here to help, If you have a question about our parts or a repair, please call 1-888-844-3393 between 8 AM & 9:30 PM M-F and 8 AM & 4 PM Sat. and Sun. (EST).
Same Day Shipping
In stock orders ship same-day when ordered by 4 PM ET. Need your parts faster? We also offer expedited shipping at checkout.
Guaranteed to Fit
We take pride in our customer service. If you had a poor experience, let us make it right. An auto parts store is only as good as its return policy. Changed your mind? No problem, We'll take it back and credit your account in full.
Instructional Video Library
Our 1A Auto Video Library has thousands of how-to auto repair installation videos specific to year, make and model. Each video guides you with step-by-step instructions to empower you to tackle your own repairs on your car, truck, SUV, or van.
Download the 1A Diagnostic App
Search by part number or keyword
Narrow Your Results:Select your year, make, model to find parts that fit
Before proceeding,
select your Vehicle, to verify this Part will fit.