How To Replace Rear Door Panel 2005-09 Chevy Equinox
Created on: 2012-02-03
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more to the Chevy Equinox, years 05, 06, 07, 08 and 09.
-
step 1 :Removing the Door Panel
- Pry off the door pull trim with a flat blade screwdriver
- Remove the two 10mm bolts in the door pull
- Remove the Phillips screw behind the door handle
- Pry off the door handle cup
- Pry off the top corner trim piece with a flat blade screwdriver
- Pry out the door panel with a door panel clip tool or putty knife
- Lift the door panel up and off
-
step 2 :Installing the Door Panel
- Lift the door panel into place
- Push in the door panel clips
- Push in the top corner trim piece
- Push in the door handle cup
- Insert a Phillips screw into the door handle
- Insert the 10mm screw into the door pull
- Push on the door pull trim piece
Tools needed
-
Socket Extensions
10mm Socket
Flat Blade Screwdriver
Putty Knife
Phillips Head Screwdriver
Door Panel Removal Tool
Ratchet
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we'll show you how to remove a rear door panel on this 2008 Equinox. Basically it's the same for any '05 to '09 Equinox as well as the Pontiac Torrent. Tools you'll need are a flat blade screwdriver, Phillips screwdriver, 10mm socket with a ratchet and extension, and a door panel clip tool or a putty knife will work.
On the Rear panel I'm going to start right back in here, use a screwdriver and pry right out right there. You follow right up, and once you get them out, then that pulls right out. There are two 10mm bolts right in here. We'll fast-forward as I use a 10mm socket with a ratchet and extension to remove those. Now right in behind your door handle is a Phillips screw. Then I carefully use a little bit of force to pull the front of your cup out, then fold that out. Now you can use either a door panel clip tool or a putty knife will actually work. Slide this between your door and the door panel. Find each clip, slide down, find a clip, get right next to it, pull. Speed it up here as I work my around the door popping those clips out. Once you have the perimeter undone, this panel here, pull it out. Then there are two more pins right in the middle here. Give it a firm tug, and that comes out.
To reinstall, you want to make sure these rectangles line up into these slots. You get it up in there about where you think it goes, and you can feel it there in the right spot. Pound it all the way around the perimeter. Put this piece back on. Put your cup right back in and press the front in. Put your screw back in. Okay, speed up the film here as I put those two 10mm bolts back in, and when you tighten them up tighten nice and firm you don't want to over-tighten them. This panel hooks into the front first. Make sure you push it into the back here. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Bleed your Brakes by Yourself
How to bleed your brakes and purge your own brake fluid if you have soft brakes or have replaced your brakes. The 1A Auto experts will show you how to safely purge air from your brake system by yourself.
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
